Florian Müllner [Thu, 16 Jun 2011 12:10:15 +0000 (14:10 +0200)]
workspaces-display: Improve pager autohide
The purpose of autohiding the workspace pager on the right was to
avoid exposure of workspaces to users who are not using them.
However, for users who do use workspaces, the behavior limits the
purpose of the overview. To fix, always show the pager if more than
one workspace is actively used.
StTheme: retrive the list of custom stylesheets and use it in loadTheme()
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
Florian Müllner [Fri, 10 Jun 2011 20:58:54 +0000 (22:58 +0200)]
statusMenu: Don't force a screen lock when suspending
The screen panel in System Settings has a preference whether the
screen should be locked on suspend. This works fine when suspending
by closing the lid, but the "Suspend" menu item in the user status
menu ignores the setting and always locks the screen.
Fix by activating the screen saver before suspending rather than
locking explicitly.
Implement a Telepathy Approver and Handler (#643594)
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
If we have more than 5 (which can happen with VPN connections), place
them into a More... submenu, which also becomes scrollable if needed.
To protect from race conditions and ordering issues while reading
connections, sort them in alphabetic order when the timestamp is equal.
Colin Walters [Fri, 20 May 2011 19:50:54 +0000 (15:50 -0400)]
Add "Memory" tab to lg
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
st-scroll-view: Make the fade effect and offset themable
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
Florian Müllner [Wed, 1 Jun 2011 12:47:51 +0000 (14:47 +0200)]
workspaces-view: Set geometry on new workspaces
Currently the workspace geometry is updated on zoom/allocation
changes, which means that newly added workspaces use their initial
geometry of (0, 0, 0, 0) until the next zoom change. As a result,
windows on the affected workspaces are mispositioned, e.g. placed
outside the workspace area. To fix, set the geometry on newly added
workspaces to the view's cached values.
Florian Müllner [Wed, 1 Jun 2011 02:23:12 +0000 (04:23 +0200)]
workspaces-view: Simplify handling of removed workspaces
Workspaces used to contain the desktop background, so when a
workspace was removed, we animated its actor to an off-screen
position before destroying it. As the background has been
removed a while ago, we can destroy the actor directly.
If the former is empty (default), only the extensions not contained in
the latter are loaded. Else, all extensions in the former that are
not contained in the latter are loaded.
Owen W. Taylor [Tue, 3 May 2011 17:22:06 +0000 (13:22 -0400)]
dash: during drag, only offer trash can when dragging favorites
We should only show the trash can when the user starts dragging a
favorite from the dash, not when the user starts dragging an application
that happens to be a favorite via a window or an application icon
in the applications view.
Some users are confused when their devices are not shown in the
network menu, even if they configured them manually. Mark their presence
by showing them in the menu, even if they cannot be otherwise
interacted with.
Also add a status string for deactivating devices (none currently,
soon will appear in NetworkManager).
Dan Winship [Tue, 5 Apr 2011 14:55:27 +0000 (10:55 -0400)]
StImText: remove two references to old clutter bugs
Remove a workaround for clutter_actor_get_transformed_position() not
working inside paint(), and remove a comment about
ClutterText::position not being properly notified, since it is now.
(However, it doesn't seem worth it to rewrite the code to use
notification, since that would actually end up being more complicated
than the current solution.)
Dan Winship [Tue, 5 Apr 2011 14:49:21 +0000 (10:49 -0400)]
StScrollBar: use clutter_actor_has_allocation()
StScrollBar was tracking whether or not it currently had a valid
allocation, but since Clutter 1.4 there is a method it can call to get
that information instead.
Colin Walters [Thu, 5 May 2011 22:09:59 +0000 (18:09 -0400)]
Change 'debugexit' to quit main loop rather than exit(), add cleanup
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Rui Matos [Thu, 5 May 2011 15:09:07 +0000 (16:09 +0100)]
panel: Don't propagate button-release-event in _onCornerClicked()
Since both the hot corner's ClutterGroup and the hot corner's
ClutterRectangle button-release-event is connected to
_onCornerClicked() we must handle it there by returning 'true' to
Clutter or else _onCornerClicked() is called twice which defeats the
HOT_CORNER_ACTIVATION_TIMEOUT logic.
Jonny Lamb [Sun, 15 May 2011 09:07:23 +0000 (10:07 +0100)]
telepathyClient: don't update notifications for outgoing messages
If you receive a message, a notification will appear. If you reply in
Empathy's chat window before the notification disappears, the
notification is updated with the contents of the message you *just*
sent! We should only update notifications if they're incoming.
Dan Winship [Thu, 5 May 2011 11:22:07 +0000 (07:22 -0400)]
altTab: remove erroneous/superflous pick
AltTabPopup was calling global.stage.get_actor_at_pos() "to force a
stage relayout", but that function does not actually have that effect.
It was also occasionally causing Clutter warnings (possibly due to a
clutter pick-buffer-caching bug?). So just remove the call.
Dan Winship [Sat, 30 Apr 2011 14:27:36 +0000 (10:27 -0400)]
environment: move more init stuff here from main.js
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
Dan Winship [Sat, 30 Apr 2011 14:00:36 +0000 (10:00 -0400)]
run-js-test: link to libgnome-shell.la
The tests were broken again, because since Shell-0.1.gir now has
'shared-library="libgnome-shell.so"', the references to Shell.PerfLog
ended up pulling in libgnome-shell in addition to the copy of
shell-perf-log.c that libjs-test was built with.
Fix all this hopefully forever by just making run-js-test link to
libgnome-shell.
Dan Winship [Wed, 23 Mar 2011 20:01:10 +0000 (16:01 -0400)]
shell: move non-ShellGlobal functions from shell-global to shell-util
shell-global had become a dumping ground for functions that didn't
have anywhere else to be. Make shell-util the dumping ground instead,
and have shell-global only have methods that involve the ShellGlobal
object.
Dan Winship [Wed, 20 Apr 2011 16:41:22 +0000 (12:41 -0400)]
lookingGlass: make Esc work on any page
The lg window was losing focus when the page with the entry got unmapped;
fix it to refocus itself after that.
Fixing this problem revealed that previously we were focusing the
entry on open(), but not ensuring that that page was selected, meaning
you could type into the entry without being able to see it. Fix that.
projects / gnome-shell.git / log